SISTEMA DE REFRIGERACIÓN EN CIRCUITO CERRADO DE TIPO SECO
DRY TYPE CLOSED-CIRCUIT COOLING SYSTEM
TORRE DE REFRIGERACIÓN Y SISTEMA DE CIRCULACIÓN DE AGUA
COOLING TOWER & WATER CIRCULATION SYSTEM
- Depending on capacity, AMELT’S AirBlast cooling tower has a cabinet with a condenser coil using 1-3 air fans for effective cooling.
- Closed-circuit cooling towers keep it contaminant free.
- This creates two separate fluid circuits: (1) an external circuit, in which spray water circulates over the coil and mixes with the outside air to increase the efficiency of the cooling and (2) an internal circuit, in which the process fluid to be cooled circulates inside the coil.
- During operation, heat is transferred from the warm fluid in the coil to the spray water, and then to the atmosphere as a portion of the water evaporates.
- In the air blast type (dry type) cooling tower, the technique is the same but with just one circulating closed water system, which is recommended for very cold environments to protect from freezing in the winter season.
PUMP MODULE
- To reduce downtime, our dry cooling system also comes with a make-up tank as well as a double circulating pump with a control panel and temperature control.
Contact us today to learn more about our dry cooling system. Whether you’re interested in integrating a closed-circuit cooling system into your shop or want to learn more technical information, we’re here to help.

- Dependiendo de la capacidad, la torre de refrigeración AirBlast de AMELT tiene un armario con una batería condensadora que utiliza de 1 a 3 ventiladores de aire para una refrigeración eficaz.
- Las torres de refrigeración de circuito cerrado lo mantienen libre de contaminantes.
- Esto crea dos circuitos de fluido separados: (1) un circuito externo, en el que el agua pulverizada circula sobre la bobina y se mezcla con el aire exterior para aumentar la eficacia de la refrigeración y (2) un circuito interno, en el que el fluido de proceso que hay que refrigerar circula por el interior de la bobina.
- Durante el funcionamiento, el calor se transfiere del fluido caliente del serpentín al agua pulverizada, y luego a la atmósfera al evaporarse una parte del agua.
- En la torre de refrigeración del tipo de chorro de aire (tipo seco), la técnica es la misma pero con un solo sistema de circulación de agua cerrado, que se recomienda para entornos muy fríos para proteger de la congelación en la estación invernal.
MÓDULO BOMBA
- Para reducir el tiempo de inactividad, nuestro sistema de refrigeración seca también incluye un depósito de reposición, así como una bomba de circulación doble con panel de control y control de temperatura.
Ponte en contacto con nosotros para saber más sobre nuestro sistema de refrigeración seca. Tanto si estás interesado en integrar un sistema de refrigeración de circuito cerrado en tu taller como si quieres obtener más información técnica, estamos aquí para ayudarte.
HAVE A QUESTION?
ASK AN EXPERT